Description

FORTEZA TRIBO-S system

The system is designed to protect all types of fences from climbing or cutting. Intruders are detected before they reach the protected territory. Security personnel can respond immediately and stop the intruder before a crime is committed.

The TRIBO-S (4) system has four zones

The TRIBO-S system consists of the following parts:

• Sensitive element (SE-86)

• Connection sleeve (CS)

• End sleeve (ES)

• Non-sensitive cable (NON-SE)

Where is it used?

The system is used for sites with irregular perimeters – i.e., cases where the use of microwave sensors is not economically feasible or where it is not possible to provide the necessary detection zone for microwave sensors.

Such sites include industrial enterprises, airports, law enforcement facilities, power plants, private properties, etc.

Fence types: light welded mesh, razor wire, wrought iron fences, picket fences, NYLOFOR, barbed wire, corrugated metal, wood, brick, concertina coils, concrete fences, and others.

How does it work?

The detector is completely passive. The system has four zones. Each zone has sensitive elements attached to the fence. The signal processing unit registers electrical charges generated in the sensitive element during an intrusion attempt. If the amount of electrical charge exceeds the threshold, the detector activates an alarm.

Sensitive element length: up to 300 m/zone

Non-sensitive element length: up to 300 m/zone

Supply voltage: 12–28 VDC

Current consumption: 25 mA

Operating temperature: -40…50 °C

Protection class: IP55

Relay outputs: NC/NO

Communication: RS-485/USB or RS-485/Bluetooth

Certificates: CE, EN50131, Grade 2

Link to manufacturer’s website: Tribo-S (4)

Installation manual: Tribo-S (4)