Check in four simple steps whether your door is compatible with the Tedee GO2 or Tedee PRO smart lock.

A Tedee smart lock lets you lock and unlock your door using your smartphone, making everyday access easier and more convenient. In most cases, a smart lock can be installed on an existing door without major modifications.

But is Tedee compatible with your door?

To find out, you need to check your lock type, door opening direction, and a few measurements. The installation method depends on whether you choose the Tedee GO2 or Tedee PRO model.

Tedee GO2 vs Tedee PRO – Which One Is Right for Your Door?

FeatureTedee GO2Tedee PRO
European lockYesYes
Scandinavian lock (for example ASSA ABLOY)With adapterWith adapter
Keeping the existing lock cylinderYesYes, with compatible adapter
Replacing the lock cylinderUsually not neededWhen using a modular lock cylinder
Key cuttingNot neededNeeded in case of European adapter
Minimum lock cylinder protrusion3 mm for direct mounting2 mm with adapter
GO2 Bar mounting adapter for Nordic locksNeededNot needed
Minimum distance from the lock cylinder centre to the door frame on outward-opening doors40 mm30 mm
Installation difficultyEasy, often takes just a few minutesDepends on the chosen installation method

Which One Should You Choose?

Tedee GO2 is ideal for those who want to install a smart lock quickly without replacing their existing lock cylinder or keys.

Tedee PRO is a good choice for those who prefer a more compact smart lock or whose door design does not allow the installation of the larger GO2 model.

Follow the instructions below to find out which solution is right for your door.

Step 1: What Type of Lock Does Your Door Have?

First, check what type of lock cylinder is installed on your door.

Tedee smart locks offer installation solutions for three main lock types.

European-Type Lock

Euro-profile lock cylinders are commonly used on many exterior and interior doors.

Tedee GO2 can usually be installed directly onto the existing lock cylinder. There is no need to replace the cylinder or your keys.

Installing Tedee PRO requires a special Tedee-compatible lock cylinder or a European-type adapter.

Scandinavian-Type Lock

Scandinavian-type locks are common in Estonia. These include many ASSA ABLOY / ASSA locking systems.

Tedee GO2 or PRO can be installed on these locks using a special Nordic adapter.

Adapter compatibility depends on the specific lock model and the design of the inside of the door. Before purchasing, you should check whether your lock meets the installation requirements.

Swiss-Type Lock

Special adapter solutions are available for Swiss-profile lock cylinders, primarily for the Tedee PRO model.

If your lock does not match any of the types described above, contact us. We will help you check whether a suitable installation solution is available.

Step 2: Does Your Door Open Inward or Outward?

Next, check which direction your door opens.

When leaving your home, do you pull the door towards you or push it away from you?

  • Inward-opening door: You pull the door towards you when leaving your home.
  • Outward-opening door: You push the door away from you when leaving your home.

If Your Door Opens Inward

Tedee GO2 and PRO can usually be installed on inward-opening doors without any extra clearance measurements in relation to the door frame.

There is one thing to consider: if your door opens against a wall, make sure the smart lock will not hit the wall when the door is opened.

If the smart lock protrudes further from the door surface than the handle, a door stopper can solve the problem.

If there are no obstructions, you can proceed to the next step.

If Your Door Opens Outward

For outward-opening doors, you need to check whether there is enough space for the smart lock next to the door frame.

With the door closed, measure the distance from the centre of the lock cylinder to the door frame on the inside of the door.

The minimum required clearance depends on the smart lock model.

ModelMinimum Distance from the Door Frame
Tedee GO240 mm
Tedee PRO30 mm

For example:

If the centre of the lock cylinder is 35 mm from the door frame, there may not be enough space for Tedee GO2, but the more compact Tedee PRO could fit.

If the distance is 40 mm or more, both models can be installed in terms of this measurement.

If the measurement is close to the minimum required clearance, you should take into account the door design, escutcheon plate, and actual mounting position of the smart lock.

If necessary, check the clear width of the doorway too.

If you are unsure about your measurements, send us photos of your door and lock. We will help you assess compatibility.

Step 3: Choose the Installation Method for Tedee GO2 or Tedee PRO

The main difference between Tedee GO2 and Tedee PRO is how they are mounted on the door.

Tedee GO2 – Easy Installation on Your Existing Lock

Tedee GO2 is intended for users who want to install a smart lock as easily as possible without replacing their existing lock cylinder.

Installing Tedee GO2 on a European-Type Lock Cylinder

  1. Leave the key inserted in the lock cylinder on the inside of the door.
  2. Place the Tedee GO2 smart lock over the key and lock cylinder.
  3. Secure the smart lock using three screws.
  4. Add the smart lock to the Tedee app and configure it according to the instructions.

Installation usually takes just a few minutes.

Important: Your existing lock cylinder must have an emergency function that allows the door to be unlocked from the outside with a key, even when another key is inserted on the inside.

We explain how to check this in Step 4.

Do You Need an Adapter to Install Tedee GO2?

This depends on how far the lock cylinder protrudes from the escutcheon plate on the inside of the door.

  • 3 mm or more: Tedee GO2 can usually be mounted directly onto the lock cylinder.
  • Less than 3 mm: A special Tedee GO2 European adapter may be required to securely mount the smart lock.

The Tedee GO2 European adapter does not require cutting a key or replacing the lock cylinder.

Tedee PRO – A Solution with a Dedicated Mounting System

There are two installation options for Tedee PRO.

1.Tedee-Compatible Modular Lock Cylinder

The existing lock cylinder is replaced with a special GERDA or M&C cylinder.

The length of the modular cylinder can be adjusted to match the door thickness and lock configuration.

You can find a guide to choosing the correct lock cylinder here.

2. European-Type Adapter

If you want to keep your existing lock cylinder and keys, Tedee PRO can be installed using a special European adapter.

The lock cylinder must meet the adapter’s installation requirements, and one of the existing keys must be cut to the required length by a locksmith.

Before choosing this installation method, check the requirements described in Step 4.

Nordic Adapter – A Solution for Scandinavian-Type Locks

If your door has a Scandinavian-type lock, such as a compatible ASSA or ASSA ABLOY locking system, you can use a Tedee Nordic adapter.

The adapter is installed on the inside of the door, replacing the existing cylinder cover or thumbturn.

The Nordic adapter can be used with both models

  • Tedee PRO: Mounts directly onto the Nordic adapter.
  • Tedee GO2: Requires an additional Tedee GO2 Bar mounting adapter.

For some locks, installation may require replacing or modifying the lock spindle.

To check Nordic adapter compatibility, continue to the next step.

Step 4: Check Your Lock’s Compatibility

European-Type Lock – Does the Cylinder Have an Emergency Function?

This check is particularly important if you want to keep your existing lock cylinder.

An emergency function allows the lock to be operated with a key from one side, even when another key is already inserted on the opposite side.

This feature is required both when installing Tedee GO2 on an existing lock cylinder and when installing Tedee PRO using a European adapter.

How to check it:

  1. Insert one key into the lock cylinder from the inside of the door.
  2. Insert a second key from the outside.
  3. Check whether both keys can remain inserted at the same time.
  4. Try turning one of the keys.

If you can turn the lock with one key and it causes the other key to rotate, your lock cylinder has the required function.

If the second key cannot be inserted or turned, installing a smart lock on the existing cylinder is not recommended.

In this case, consider replacing the cylinder with one that has an emergency function.

European-Type Lock – How Far Does the Cylinder Protrude?

On the inside of the door, check how far the lock cylinder protrudes beyond the surrounding escutcheon plate or security rosette.

For Tedee GO2:

If the lock cylinder protrudes by at least 3 mm, the smart lock can usually be mounted directly.

If the protrusion is smaller, a special GO2 European adapter can be used.

For Tedee PRO:

To install the special European adapter, the lock cylinder must protrude by at least 2 mm. An emergency function is required.

If the existing cylinder is not compatible with the adapter, it can be replaced with a Tedee PRO-compatible modular cylinder.

If the inside of your door has a thumbturn instead of a key, a standard adapter solution may not be suitable. In this case, you need to check whether the existing lock can be modified or whether the cylinder must be replaced.

Scandinavian-Type Lock – Is the Nordic Adapter Compatible?

To install the Nordic adapter, the lock cylinder cover or thumb turn on the inside of the door must be separate from the door handle backplate.

Compare your door with the following examples.

For ASSA ABLOY / ASSA locks, compatibility depends on the type of escutcheon plate, lock case, and spindle used.

If the lock cylinder has a separate cover, installing the Nordic adapter may be possible without major modifications.

If the door handle and lock cylinder share a single backplate, the adapter cannot be mounted in the standard way. In some cases, replacing the backplate can solve the problem.

We recommend checking the compatibility of your specific lock before ordering the adapter.

Swiss-Type Lock

Swiss-Type Lock Cylinder

For Swiss-profile lock cylinders, Tedee PRO can be installed using a suitable adapter.

Before installation, check that the lock cylinder has an emergency function and that there is enough space to mount the adapter.

One of the existing keys usually needs to be cut to the required length by a locksmith. If you are unsure about compatibility, we recommend contacting us before purchasing.

Do You Need a Tedee Bridge?

Once you have chosen the right smart lock and installation method, it is worth considering whether you need a Tedee Bridge.

Tedee Bridge is a small accessory that connects your smart lock to the internet and enables remote access features.

With Tedee Bridge, you can:

  • Lock and unlock your door remotely;
  • Check whether your door is locked;
  • View lock activity history;
  • Connect your smart lock to various compatible smart home systems.

Read more: What is Tedee Bridge and Do I need one?

Not Sure Which Tedee Smart Lock Is Right for Your Door?

If you don’t know your lock type or are unsure about your measurements, contact us.

Send us photos of your door and lock, preferably showing both the inside and outside of the door. If possible, include the model of your lock case or lock cylinder.

We will help you determine whether Tedee GO2 or PRO is compatible with your door, which adapters or accessories you need, and whether your existing lock cylinder needs to be replaced.

This way, you can be confident that you are choosing the right solution for your door before making a purchase.