Description

FORTEZA sensitive element (SE-86)

Name: FORTEZA SE-86 sensitive element
SKU: TRIBO-SE-86
Price: 2.29 EUR
Availability: OutOfStock

The Sensitive element (SE-86), attached to the fence, is designed to generate electrical signals in the event of mechanical impact or vibration on the fence. The sensitive element is a specialized cable manufactured according to FORTEZA technical requirements.

Purpose

The sensitive element is part of the TRIBO-S fence protection system, which registers deformation and vibration of the protected fence section at the location where the sensitive element is installed.
The fence section is connected to the TRIBO-S controller either directly or via a non-sensitive cable (NON-SE).
The system is designed to protect all types of fences against intrusion by climbing over or breaking through the fence.

Recommended installation method

Applications: barbed wire, concertina wire, mesh fences, wood, brick, reinforced concrete and steel fences, metal grilles, roofs of buildings and hangars, gates, etc.

Special features

Triboelectric effect (high resistance to changing weather conditions and industrial interference);
Two detection parameters – deformation and vibration;
Easy to restore after damage using a connection sleeve;
Quick and easy installation; convenient and simple operation;
Excellent price-performance ratio compared to similar detectors;
Option to choose sensitive elements of different lengths.

Installation instructions for standard fences:

Proceed according to the project documentation;
Ensure that the ambient temperature is not lower than –5 °C;
When installing the sensitive element along the fence, maintain a bending radius of at least 120 mm;
Use plastic cable ties (140 × 3.5 mm), Nylon 6.6, V2 UL94 at the fastening points of metal mesh and grille-type fences;
Temperature range: –40 °C to +100 °C;
Distance between fastening points: 10–45 cm, depending on the fence type;
For metal bar and wooden fences, use galvanized wire (2.5 mm) or other suitable fasteners;
The installation method of the sensitive element depends on the type of fence.

For non-standard fences:

If the TRIBO-S system is used on non-standard fences, we recommend first checking how the system performs and detects intrusion on that specific fence type.
We offer equipment for testing, customer demonstrations, and trade fair displays at a special discount (significantly lower than the retail price).

For testing:

Prepare approximately 10 meters of sensitive element and install it in the chosen manner on one or two fence segments.

Connect it to the TRIBO-S device and configure the sensitivity.
Test the TRIBO-S sensitivity.
Test noise immunity (wind, vibration, impacts).
If TRIBO-S detects an intruder but does not trigger alarms due to noise, this installation method can be used for the entire fence. Sensitivity remains uniform throughout the length.