IP180 Internet module for Paradox devices Ethernet\/Wi-Fi, compatible with IPC10 and BlueEye mobile app.
The IP180 internet module allows you to connect to Paradox devices over the internet and perform remote management\/configuration, transmit signals to the security company (IPC10 only) and use the BlueEye mobile application. Thanks to its Wi-Fi capability, you can also connect wirelessly to a router\/local area network, or connect to a local area network\/internet using an Ethernet cable. IP180 allows you to send system events by email.<\/p>\n
Supports Ethernet (10\/100 Mbps) and Wi-Fi 2,4 GHz (B\/G\/N)<\/strong><\/p>\n<\/li>\n Uses MQTT technology<\/p>\n<\/li>\n Compatible with EVOHD+, SP+, MG+ and most panels manufactured after 2012. <\/p>\n<\/li>\n Reporting only through IPC10-receiver; IPRS7\/ IPR512 not supported.<\/p>\n<\/li>\n Compatible with BlueEye; not compatible<\/strong> with InsiteGold app.<\/p>\n<\/li>\n Supports up to 4 receivers<\/strong><\/p>\n<\/li>\n Easy installation, wi-fi antenna available as accessory<\/p>\n<\/li>\n<\/ul>\n Power supply: 10 \u2026 16,5 V DC<\/p>\n<\/li>\n Consumption ~ 100 mA.<\/p>\n<\/li>\n Working temperature: -20 \u00b0C \u2026 +50 \u00b0C.<\/p>\n<\/li>\n SIze: ~ 10,9 \u00d7 2,7 \u00d7 2,2 cm.<\/p>\n<\/li>\n Certificates: CE, EN 50136 ATS5 Class II.<\/p>\n<\/li>\n<\/ul>\n Deivce must support MQTT.<\/p>\n<\/li>\n If the panel has two serial ports and multiple communication modules are connected (for example, a GSM\/4G module), the installation rules must be followed: the IP180 must be connected to the Serial-1 port, and the other modules (e.g. GSM) to the second port.<\/p>\n<\/li>\n A static IP address is not yet fully supported until the next software update.<\/p>\n<\/li>\n Make sure that the reporting format is set to Contact ID, as the IPC10 receiver requires this format.<\/p>\n<\/li>\n<\/ul>\nTechnical Specifications<\/h4>\n
\n
\n